1x 510g Mouldcraft GP-325 RTV Condensation Cure Mould Making Silicone Rubber

THIS IS A SHORE 25 OUR RANGE IS FROM 10 BEING THE SOFTEST TO A SHORE 60 THE HARDEST SILICONE WE HAVE

1 x 1kg Mouldcraft SG2000

Paintable Fast Cast Polyurethane Liquid Plastic Casting Resin

4 x 600ml Clear Calibrated Plastic Mixing Cups
3 x Pairs of Latex Gloves
1 x 10 Wooden Mixing Sticks

Information

Using our Mouldcraft casting combination kits you can cast many and various original parts including small sculptures, figures, scenario models or even engineering components

You will be able to create just about anything required in the moulding making industry, engineers can use the process as part of their rapid prototyping work whilst artists can easily make copies of their original work as samples or demonstration pieces.

With the original part removed from the silicone the mould can then be used to create accurate and detailed reproductions of the original part by pouring mixed casting resin ( Mouldcraft SG2000) into the mould. Mouldcraft SG2000 included in the kit is a very easy to use Fast Cast polyurethane resin which will flow easily into the fine surface details of the silicone mould and then cure quickly (within an hour) to a strong plastic copy of the original part. ( colour polyurethane pigments can be bought to colour this resin from our ebay shop)

Mouldcraft GP 325 high strength silicone mould making rubber has been formulated for easy mixing by hand, with colour coded components, giving a visual aid to ensure mixing is adequate. The two components mix easily and because of the low viscosity most grades can be used without processing in a vacuum chamber. This silicone is suited for the detailed reproduction of figures, art objects and similar items.

Applications include : Patterns, Negatives, Castings, Models, Vacuum forming tools, prototypes etc.

Specification

Silicone GP-325 SG2000 PU Casting Resin
Mix Ratio 100 : 2 1 : 1 By Weight
Working Time 40 - 60 2.5 - 3.5 Minutes
Curing Times 6 - 8 Hours 15 - 20 Minutes @ 25°C
Cured Colour Light Pink Ivory / Off White
De-Mould Time 12 - 24 Hours 30 - 60 Minutes @ 25°C
Mixed Viscosity 18000 50±5
Hardness Shore A 25 D 72±2
Tensile Strength 3.0 Mpa
Elongation 520 @ Break %
Tear Strength 23 kN/m
Linear Shrinkage 0.2-0.4

Instructions Sheets available by request via email or watch the how to video tutorials on our mouldcraft website
Please note this silicone is not suitable for food use. It is also not suitable for direct use on skin. ( however we do sell these in our ebay shop and website

Base and catalyst use universal containers for various kit sizes and are supplied by weight, while the supplied containers may not be full, they will contain the correct amount of both base and hardener according to the listing.

packaging will be bubble wrapped and boxed up, lids may be taped to prevent damage or spillage during transportation.